Jermaine Byers' Blurty
 
[Most Recent Entries] [Calendar View] [Friends View]

Wednesday, August 3rd, 2011

    Time Event
    1:59p
    The Value Of Banana Plugs
    Banana plugs are connectors that are typically attached to the end of speaker wire. They provide some added benefits over bare wire in terms of connecting the speaker wire to the terminals of your home audio system. I will go over these advantages and even discuss some of the common fallacies about banana plugs in the following paragraphs.

    A huge advantage that banana plugs offer over plain bare speaker wire at the termination point could be the extra convenience. Bare wire causes you to spend additional time with connecting your speaker system and they may cause problems such as stray wire shorting the entire system. It gets to be a headache if you need to carefully put in and connect the bare wire twice for every speaker. If you have banana plugs installed on every single wire, you basically plug in the line just like you would with say an HDMI cable. You can accomplish this in a few seconds.

    Once bare wire has corroded you may notice the audio from the channel start to crack or become intermittent. Banana plugs can prevent this from happening due to the fact they are protected from oxidation. Just be sure the banana plugs are gold plated and you are going to have nothing to worry about.

    Another big advantage to using banana plugs is simply because it results in a really professional and clean looking appearance to the set up. In most instances where bare wire is used, the installation appears to be poor when you have stray wire protruding out of the sides. If you would like to steer clear of this, banana plugs are the best option for you.

    When it comes to sound quality, banana plugs don't produce a difference versus bare wire. Nonetheless, should you wear out the bare wire strands on the speaker wire by not using banana plugs, you may have noticeable problems with sound quality. This can require you to trim off the weakened ends of the speaker wire and start over to produce clear sound from your speakers.

    The greatest drawback of not using banana plugs and just using bare wire is the possibility of damaging your system because of cross termination of stray wire strands.

    It is highly recommended to use screw type banana plugs since they are easy and simple to install. There is no soldering required with screw-type plugs. All that you simply must do is insert the bare wire in the plug and screw the plug together clamping the bare wire internally.

    Even though banana plugs won't boost sound quality, they do present a lot of great rewards that make them worth getting. Because they are also found very cheap online, they are definitely a essential purchase.



    You can get them at http://www.cabletrain.com/cables/speaker-wire/banana-plugs

    banana plugs
    9:21p
    Make Easier Connections With Banana Plugs
    Banana plugs are copper connectors that are for terminating speaker wire. There are numerous excellent advantages for having banana plugs. I will discuss these advantages and even talk over some of the popular misunderstandings about banana plugs in the following lines.

    One of the primary benefits to using banana plugs over plain bare speaker wire is the convenience that they deliver when hooking up the audio system. Bare wire can be quite a hassle because you have to make sure the strands of wire are together because stray strands of copper wire can sometimes be a problem down the road such as shorting out the system. It becomes a headache if you need to cautiously insert and connect the uncovered wire twice for every speaker. By having banana plugs placed on the ends of the speaker wire, all you need to do is plug in the wire just like you would with any other cable. You can accomplish this within a couple of seconds.

    Bare wire can also create issues by corroding. As soon as a bare wire has corroded, you are going to hear noticeable cracking or noise on the signal. Banana plugs get rid of this issue because they're corrosion resistant. Because most banana plugs are gold-plated, the copper is protected so you will not have to be concerned about the negative troubles that exposed copper may bring.

    Another huge advantage to using banana plugs is because it adds a extremely professional and clean looking appearance to the installation. In many instances where bare wire is used, the result of the installation seems to be sloppy when you have stray wire protruding out of the sides. So if you wish to have a better end result to the install your speaker system, you should consider banana plugs.

    Banana plugs don't strengthen the overall performance of the audio. Just like any copper, even a coat hanger can send out audio signal. Nonetheless, with out banana plugs, you take a possibility of the exposed copper corroding and effecting the quality of sound. This can require you to trim off the weakened ends of the speaker wire and start over to produce clear sound from your speakers.

    The most significant drawback of not using banana plugs and simply using bare wire will be the potential for harming your system because of cross termination of stray wire strands.

    It is suggested to get screw-type banana plugs considering that they're easy and simple to install. There isn't any soldering required with screw-type plugs. All which you should do is insert the bare wire into the plug and screw the plug together clamping the bare wire on the inside.

    Overall, banana plugs are just a great approach to take care of and add quality to your installation as well as convenience. Being that they are also found really cheap online, they are definitely a essential purchase.



    The best place to get banana plugs is at http://www.cabletrain.com/cables/speaker-wire/banana-plugs

    banana plugs

    << Previous Day 2011/08/03
    [Calendar]
    Next Day >>

About Blurty.com