customcap4's Blurty
 
[Most Recent Entries] [Calendar View] [Friends]

Below are the 20 most recent journal entries recorded in customcap4's Blurty:

    [ << Previous 20 ]
    Sunday, May 19th, 2013
    8:36 am
    for the weaving factory
    for the weaving factory, the need for more plant space, it means extra costs and extra machine maintenance. Unished2 compact design can be installed directly on the loom, so that the plant height than the traditional jacquard reduced by 30% to 50%, saving the cost of construction investment and energy consumption. Also, because there is no platform, harness, springs and other equipment made parts, each equipment rack and install at least made less investment and maintenance costs 5 million to 8 million euros. According to estimates, Unished2 investment costs compared to traditional total cost of the investment can save at least 20%, economic efficiency improved significantly. "No-pass through numerous electronic jacquard silk practice to prove its superior performance, will shine in their unique areas, for our customers to create more profit." Gross Regional Sales President Hansiyueke? embroidery digitizing

    Kale is convinced that the development of non-pass Siti Gross flower machine will lead the new century, jacquard weaving techniques. All along, the Jacquard machine is installed in a high platform, through the harness and the mechanical movement of the needle and put down the passive control device to open the warp. Jacquard harness to eliminate the industry has been ideal. Now the German company introduced the first Gross mature technology without through Siti flower machine, without mention of its opening needles, magnets, pulleys, pull-down spring, but through the provision of needle warp speed control of the upper and lower active position openings, the first truly out of the "harness" for jacquard design and production industry constraints. Gross, vice president of China Jiang Shuhui described the device as "a new era of jacquard machines." Currently, consumer demands for jacquard fabric market changes very fast, so multi-species, large-scale, flexible production jacquard fabric manufacturer has become the most important competition logo. chalk boards

    However, traditional electronic jacquard design principle because of its limitations, such as needles and harness equipment manufacturing, large companies limited device configuration jacquard fabric, flower design, production and so the ability to respond to the market, even brought to the production and quality management a lot of confusion, resulting in additional cost and quality risks. Unished2 can quickly achieve different patterns and fabric density and species of replacement, but can also select the auxiliary yarn frame, all of these features enable enterprises to significantly reduce the time proofing and delivery, flexible multi-species scale management, personalized products and production scale of this contradiction is effectively unity, and improving the market's rapid response capability and the overall efficiency of internal management. baseball caps

    In 1999, Gross developed a first-generation machine through Siti flowers and ITMA exhibition in Paris the same year exhibited for the first time this positive opening jacquard machine, and now Gross has introduced a number of technological innovations to achieve the second generation No pass Siti flower machine. Unished2 each warp yarn with a separate, positive, and the continuity of personal control, completely eliminating the traditional circular pattern jacquard fabric design for the shackles, the designer can arbitrarily according to market trends play to their design talents to ensure optimal flexibility . At the same time, the design can be fully met after processing processes the request for pattern design to achieve maximum production efficiency, for example, jacquard fabric, after cutting according to the requirements of layout, design jacquard weaving pattern and location, to improve cutting efficiency. Opening action of traditional jacquard silk pull-down device can only be done through the pass, weaving device need to support the lifting of silk jacquard and pass in the above, fitted hats

    8:35 am
    What the accurate income condition that the exhibition
    though being a planning of principle , some aspects are very concrete , and for example speak that exporting the drawback rate with the textile raise to 15% . He put forward the spinning and weaving enterprise in " suggestion " to melt the problem that money is difficult once , and still especially to mention to the basic face in the planning this time better but temporary transient has appeared managements gives the credit support with the enterprise of financial affairs difficulties , and encourages the guaranty organization to provide the trustworthiess guaranty and melts the money service , and lightens enterprise burden etc. . Whether Zhao Linzhong's theory can plan though going back that it's hard to say to put into effect the meeting in short time what effect to be given rise to to the spinning and weaving industry development , and follow upward the settlement problem basic now , and anyhow , blankets

    the party Central Committee and State Council have heard sound that comes from the most most the basic level , and that the call of basic level deputy to the National People's Congress has got answers , the highest policy decision layer of center and basic level " the people " thinks having gone at the same place . 2 months 11 days interrogating in 2009 2 months 10 days , Shandong is gratified will to strike a pose on the stage French first visual sense outside material fair , and that this is indicating is gratified Shandong becomes first of China spinning and weaving outside material enterprise gains the enterprise that newly the most popular outside material of the whole world and popular trend were issued power , thus has realized the China spinning and weaving outside material enterprise cause " China makes " direction " China creates " the great breakthrough . That this at home spinning and weaving circle has caused causes a sensation , and as if the China football has been bursted into the world cup , because this is the vain hope of several generations of spinning and weaving person after all . corporate gifts

    Recently , personages inside circle such as the group that the China spinning and weaving information center product cause part director is valuable and Shandong is gratified assistant manager man's rosy clouds has been had an interview with in reporter at this point subject of a talk and Hebei Ji Gao's chemical fiber limited duty corporation general manager Song Dewu etc , their in succession PV open up standard crosss the threshold banisters , China spinning and weaving enterprise and outstanding spinning and weaving enterprise of the world existences the gap etc the problem published self the view PV's exhibition is more stressed creating new meanings and innovates Was not there French first visual sense outside material fair of enterprise name with the brand participation ( abbreviation " French PV's exhibition " or " PV's exhibition " ) that the ability is with self in our country outside material enterprise , and is that the threshold of PV's exhibition is too high many years ? business gifts

    What the accurate income condition that the exhibition is understood is actually To this , China spinning and weaving information center product cause ministry director opens jade and has talked her view : French PV's exhibition is different from Texword,Texword's exhibition and stresses Shang Mao's effect , but what stress is PV's exhibition innovates that the reason is read , and more lays stress on to creat new meanings . Therefore PV's exhibition the person who fixes the accurate elementary course banisters not with the scope of enterprise and sales are the basis , and can gaining the enterprise of accurate qualification of PV's exhibition certainly is possessing the higher enterprise creating new meanings and innovates the ability . A lot of ginsengs sights now PV's exhibition is not going to look for the product , and is going to look for the inspiration , and is the train of thought going to seek the product development Introducing according to France PV exhibition correlation person in charge , why PV's exhibition possesses originality and authority's , company gift

    Saturday, May 18th, 2013
    9:27 am
    our eyes can see by color. Icon to hydrogen atoms and hydrogen
    gathered from the absorption spectra. (Each wavelength of radiation from a duplication phenomenon, we will produce a continuous curve, explain the more able to understand a single wavelength; and in fact should see the beam of light.) E = E1-E0 = h = hc / : Frequency : wavelength of radiation absorbed h: Planck's constant for saturated aliphatic compounds closely to the formation of the electronic structure of bonding than the steady state; lead easily jumped off, straw hat

    to place the electronic dissociation energy of the energy must be large much more. Simple unsaturated compounds, for example: CH2 = CH2 its dissociation energy is about 710 KJ / mole in the UV 175nm absorption spectra measured at a peak; if gathered with more unsaturated compounds, will make the maximum absorption wavelength to long wavelength mobile, that is easier to electronic beats, a dissociation energy but if 148.4 KJ / mole ~ 297 KJ / mole between; radiation emission wavelength is 400nm ~ 800 mm in the energy required, newsboy cap

    our eyes can see by color. Icon to hydrogen atoms and hydrogen molecules to interpretation: Theory of ONWitt unsaturated cyclic molecules (with bond) to generate chromophores with colors, to the formation of dye chromophores must join to get help. The purpose connected auxochrome: (1) to help dye color, hair color enhanced ability chromophore. (2) increasing the dye and the affinity between the material to be dyed. (3) to increase the water solubility of dye. Electrophilic substitution reaction of (Electrophilic Substition): E?

    With higher electron density of the material; example: Benzene quite capable of attracting substances bind electron deficient, and these will be referred to as electron-deficient substances have an affinity for electrical phenomenon, but with In the case of the product after the strong electrophilic electron-deficient material, the weaker electrophilic out the material would be replaced. This process is known as electrophilic substitution. Nucleophilic substitution reaction (Nucleophilic Substition): Nu number of electron-deficient material,
    fedora hats

    9:26 am
    wool fabric dyeing, also used for leather, paper dyeing
    Adding an appropriate amount of ice, stirring 30% hydrochloric acid 264kg, control temperature 10-15 , the mixture of materials in 10min or so barrels of adding diazo barrel even at 10-15 , to keep acid in excess, under conditions of excessive nitrite micro- Stir 0.5h, may have nitrogen as the suspension. The coupling barrel water 400L, 2 - naphthol 141.8kg, stirring the liquid caustic soda (30%) 143kg added, heated to 45-50 , to dissolve the ice after cooling to 8 , salt 19kg, quickly adding half the full amount of diazonium salt. embroidery digitizing

    Add salt 37kg, then the other half evenly diazonium salt added at the End of 1h and adjust pH.1 stirring 1h, add salt 75kg, continue stirring until disappearance of diazonium salt coupling end (about 1h). Filter press, filter cake dried at 100-105 . Standardization of dyes was 880kg. Consumption of fixed (reference) kg / t 2 - naphthol 352 sodium carbonate (98%) 57 amino benzene sulfonate (100%) 496 HCl (31%) 97 sodium nitrite (98%) 175 Sodium Sulfate 10 Sulfuric Acid (100%) 255 sodium salt 70 (100%) 96 11 Pacific oil is mainly used for purposes of silk, chalk boards

    wool fabric dyeing, also used for leather, paper dyeing. In the acid bath can be dyed nylon. The product can be wool, silk printing directly on the nylon, also used as coloring agents and biological indicators. Specifications GB 1641-82 Index Appearance yellow uniform powder Shade Similar to standard intensity, divided into 100 3 standard sample of water,% 5 Water insoluble,% 0.5 Fineness (80 mesh sieve residue) ,% 5 in the wool fabric dyeing fastness, grade meet standards sun the main fastness: 4; soaping: 4; flooding :4-5; perspiration: 3; friction: 4 -5 level; dry :4-5; ironing :4-5 Acid Red B Acid purple; baseball caps

    acid purplish red; acid purple B English name C.1.Acid Red 14 (14720) Chromotrope FB; Carmoisine (Sandoz) ; Solar Rubine (Sumitomo); Lissamine Red W (ICI); Acid carmoisine B; Acid red B formula C20H12N2Na2C7S2 502.440 CA registry number 3567-69-9 molecular weight product traits dark red powder. Case of concentrated sulfuric acid purple to magenta precipitate was diluted. Blue red solution dissolved in water, fitted hats

    Friday, May 17th, 2013
    10:17 am
    pointed out: fiber spinning system
    pointed out: fiber spinning system of standard samples is the system of public welfare of the national standard samples part of the project is to promote the fiber spinning the basis of standard sample system work, fiber spinning is the focus of recent work of the Working Group. Pingping Jiang stressed: Through discussion and further defined the standard fiber spinning system for the main content of the sample, that is the program of work, the analysis of underlying conditions, to study architecture and the preparation of research reports, sample standards in China fiber spinning system the scientific development of recommendations ; identified fiber spinning system of standard samples principle that science and advanced principles of coordination, and principles, integrate the principles of international principles and service industries; implementation of the standard sample system of fiber spinning division of work and schedule, the success of this forum sign. He asked: every member of the Working Group should actively participate in research work, to complete the tasks identified in the meeting for the construction of standard sample fiber spinning system, straw hat

    perfecting the content of the standard materials system, and promote the work of our standard sample spinning fiber contribute to the development . According to statistics, in addition to Beijing and Shanghai, other than the two textile machinery exhibition, held in various cities each year from the textile machinery exhibition of about 15 to 16. Have a more mature compared to Beijing, Shanghai textile machinery exhibition, the show is simply local or cotton, chemical fiber, dyeing and other content, look larger than the whole, small and not professional, coupled with the organization of exhibitions, service poor, the majority of Show all sad to be costly. Textile enterprises generally agreed that every two years in Beijing and Shanghai International Textile Machinery Exhibition Exhibition on Textile Industry has been able to meet most business needs of exhibitors and visitors. Under such circumstances, local, professional textile machinery exhibition there is also the meaning of it? In the local, professional show was no way out, we were surprised to find that more and more inclined to participate in textile machinery business and even sponsor various industry exchanges.newsboy cap

    This phenomenon from another side note, in addition to two major exhibitions, the textile machinery business activities for the other shows there is a demand. Both ways to make a fuss complete industry chain is most characteristic of the textile industry chain longer. In the textile industry chain, the role of textile machinery is very important to play the role of the chain stitch. It does not belong to the textile products industry chain, it is linked chain of the textile products industry an important medium. Raise the level of textile machinery and equipment is the most important textile industry, the driving force of technological progress. Textile Machinery Exhibition on display products - textile machinery in the textile industry, the special position of the chain, textile machinery exhibition should work closely with upstream and downstream industries, make the role of industry convergence. In the convergence process to find a breakthrough point.

    Textile machinery exhibition in the tour group, the most important professional audience and the audience of textile products. When we carry out this part of the breakdown of visitors will find a wide range of textile products because of the different types of products, production of industrial and textile machinery may be used in completely different, completely different products of their concern. "I have this to textile machinery exhibition is to see the latest winding equipment, intends to buy a group of wool carding equipment, eliminate a number of backward equipment." Representative of a wool textile enterprises came to Shanghai on the straight wool carding textile machinery exhibition equipment. While the total work, a cotton spinning enterprises are very interested in the automatic winder, with several domestic and foreign auto winder manufacturers representatives of the conversation carefully. From spinning to fabric and then to textile wearing apparel, the selection of raw materials,
    fedora hats

    10:16 am
    States and other developed countries
    States and other developed countries is expected to slow, large-scale relocation of their textile industry, textile market fundamentals weakened. In addition, the U.S. textile industry is expected to face after the abolition of quotas from developing countries competition. WTO trade field through the integration effort, which will affect the U.S. textile exports. The highly competitive world textile fiber market, which is characterized by abundant fiber supply, profit margins, chemical fiber raw materials more and more popular alternative to natural fibers such as polyester. Synthetic / man-made fibers in the developing regions are expected huge demand in developing regions population and fast economic growth. Aromatic poly amide and carbon fiber of high-value, expected growth and stability. Over the years, home textiles and home furnishings manufactured fiber consumption has been expanding.embroidery digitizing

    Although the textile industry traditionally dependent on natural fiber home furnishings, but in recent years, due to intrinsic features, environmental and cost advantages, fiber consumption has been growing rapidly. PET is the fastest growing man-made fibers, because the garment industry on polyester demand. Yarn is a synthetic fiber products, yarn for weaving, knitting, weaving, carpet manufacturing, end zone and the heat, or mixed methods. Textile yarn, cotton yarn global market will be dominated, followed by chemical fiber yarn and the yarn. The textile industry from spinning products. woven fabrics and knitted fabrics, building material composition, the textile industry is highly cyclical. Produced on the textile industry has an important influence factors, demographic factors, disposable income growth, consumer confidence, technology, fashion trends, and other integrated economic variables. chalk boards

    Textile demand depends on fashion trends, overall economic environment and social impacts, such as sources of raw materials, culture, lifestyle factors, geographical location and environmental factors. Textile market in terms of price competition and fashion textile manufacturers to promote such as coated textiles. Technological advances in textile manufacturing plant to develop more lightweight fabrics more comfortable, and the elastic fibers. Manufacturers use to produce fiber combination with anti-wrinkle, shrink-proof, comfortable, more responsive to changes in the weather, washable, easy to wear clothing and other functions. Textile industry is one of the individual labor-intensive industries, countries with lower labor costs relative to benefit. In the world textile market, China's cotton, wool and chemical fiber garments dominate the annual production capacity, fiber production is huge. China has become the cotton, wool and chemical fiber (eg polyester) and producer. China is the textile exporting countries, baseball caps

    South Korea, Taiwan. India and Pakistan among the world's 15 textile exporting countries and regions as well. The development of the United States and other developed countries is expected to slow, large-scale relocation of their textile industry, textile market fundamentals weakened. In addition, the U.S. textile industry is expected to face after the abolition of quotas from developing countries competition. WTO trade field through the integration effort, which will affect the U.S. textile exports. The highly competitive world textile fiber market, which is characterized by abundant fiber supply, profit margins, chemical fiber raw materials more and more popular alternative to natural fibers such as polyester. fitted hats

    Thursday, May 16th, 2013
    8:56 am
    the function depending on the functional requirements needed
    may be something on the wall for the rest of the shade. Therefore, the curtains of color, style, etc., often plays an important role. Similarly, for the hardcover of the family, the right curtain will make home more beautiful, more personality. 4, acoustic noise we know, from the mode of transmission of sound, the treble is a straight line, and window glass for the treble is a strong reflection. Therefore, the proper thickness of the curtain, you can improve the indoor sound effects; Similarly, straw hat

    the thick curtains also help absorb some of the noise from the outside to improve the indoor sound environment. (B) a request to buy curtains, curtain design style we know there are many types of styles, these styles and interior design style and has a close relationship. Therefore, the choice of curtains, the design is the first requirement. That is, all factors curtain, the first matched with the style of the room. At this point, you need more advice on your interior designers, in order to avoid an imbalance. newsboy cap

    2, the function depending on the functional requirements needed in the design on a consistent basis, you need to choose the thickness of the curtain. In general, for the bedroom, there are two methods: (1) use a thicker fabric. (2) with a thick cloth, while the inside layer of gauze curtains do. As in what program, which consider the actual situation, for example, is not allowed to use some design style chiffon curtains. 3, select the fabric curtain fabric there are many choices, following a brief introduction about fabric: (1) light, thin transparent or translucent fabric, such as cotton, polyester cotton blended fabric,

    glass yarn, fine mesh fabrics, lace and Barry yarn. (2) medium thickness opaque fabrics, such as fancy organizations cotton, nylon and blended fabrics, sloppy mesh cloth; slip surface fabric, such as polished chintz, polished cotton, antique satin, silk and other silk and corrugated . (C) According to the suit even if the design of a fabric selection, design and color are varied. Choose a different color, for the design style has a great impact.
    fedora hats

    8:55 am
    request for privacy on the lower, most of the family living
    with a common The voice, so that the state's industrial policy-making departments to realize that the work of national importance and the economic feasibility of sustainable development, so that it can help us win the national industrial policy to give more support to facilitate the industry healthy and stable development.Curtains in interior decoration, plays the protection of privacy, the use of light, decorative walls, acoustic noise-isolation effect. According to the severity of its effects, the choice of curtains, there are many different package. embroidery digitizing

    In short, the choice of curtains is a critical project. Whether the owners, or interior designer should be highly valued. (A) of the decoration from the functional understanding of curtain 1, the protection of privacy for a family, who do not like their every move within the view of others. From this point, the different interior regions, the degree of concern for privacy has different standards. Family members of the public activities of such living room area, the request for privacy on the lower, most of the family living room are the curtains during the day, so many in the decorated state. chalk boards

    For bedrooms, bathrooms and other areas, it requires not only the outside can not see, and requires even in sight. This presented a different problem areas choose a different curtains. We may choose the living room side and transparent fabrics, the bedroom is thicker quality fabrics. 2, the use of the light in fact, privacy, or by blocking the light to play a role. The use of the light mentioned here, refers to the protection of privacy case, the effective use of light. For example, a two-story living room, baseball caps

    we do not like to walk around outside the room who saw every move, but long-term impact of pulling the thick curtains and natural light, so similar to a class of thin ply gauze to came into being. 3, decorative curtain walls for many ordinary families, is the largest wall decorations. Especially for some of the "four white-landing" simple decoration of the family, in addition to the pieces of the frame, fitted hats

    Wednesday, May 15th, 2013
    8:59 am
    caused by smoking uneven color, staining the cloth was spread
    which reduces the quality of fabric, the loss to the enterprise. So, of two-component polyester filament fabric dyeing, and the causes of faults to be generated to prevent, for enterprises it is very important. 1.2 The polyester POY yarn evenness of the original defect formation dyed POY polyester filament yarn evenness of the original stained defect prone to reason that when the evenness of the POY strands subjected to steady tension,straw hat

    the thick and thin crystalline orientation difference The remaining stretch ratio, boiling water shrinkage rate is high, stained dark color absorption; the other hand, details of the absorption light color, which makes the composite wire showing a spread cloth-like fabric dyeing defects. Epithelia of the stem if the deviation of low shrinkage large uneven heating during drawing, it will cause a shortage of over-stretching or drawing to produce a number of the fiber strength of defect points, or surplus points, boiling water shrinkage rate fluctuations, newsboy cap

    caused by smoking uneven color, staining the cloth was spread like easy to form the uneven distribution of the depth of the color section of spots. Similarly, when the POY filament epithelia of low shrinkage and high shrinkage in the core wire of bad cohesion of two components, opening inadequate disorder is incomplete, it can not form a stable new structure of uniform fiber composite wire, two points relative dispersion, the composite wire performance will tend to single-component fiber properties, the weaving dyeing and finishing, the fabric is easy to form a more continuous dark or light bar (with) phenomenon.

    Specifically, as the epithelia of the low shrinkage fiber increases, the performance of composite wire tends Pisi, boiling water shrinkage is small, poor dye uniformity. At this point if the low shrinkage Pisi evenness deviation large section of the cloth dyeing spots showing obvious. With the high-shrinkage fiber core wire increases, the performance of the composite wire tends to core wire, crystal is not sufficient, and even multi-colored smoke, cloth dyeing defects less. On the other hand, when the silk fiber and core Pisi considerable degree,
    fedora hats

    8:58 am
    strong sense of their, no aurora, both wool, linen style. In particular
    using a variety of polyester bicomponent fiber material developed a variety of downstream textile products have a lot of new, polyester PET and PTT polyester products such as two-component technology is very mature, especially downstream users adopted this kinds of fiber raw materials like fabric very popular with end users, the market prospect is very promising. Second, the two-component fibers and techniques of the type 1. Polyester filament two-component product development and technical problems in the 1.1-national two-component polyester filament products, embroidery digitizing

    development of domestic enterprises to adopt two long polyester pre-oriented polyester POY filament yarn, which made a drawing in the drawing on a twisting machine to form a highly crystalline low shrinkage of the drawn yarn, and then feed the people with the simultaneous pre-orientation of the other root POY filament complex network processing, thereby creating a hold together tightly, the new structure and unique style fiber, polyester fiber from such two-component composite filament fabric, chalk boards

    velvet fabric, strong sense of their, no aurora, both wool, linen style. In particular, the choice of two different holes of various deniers of polyester filament yarn POY, one of the fiber orientation by stretching the full crystal structure more stable, boiling water shrinkage rate of between 20% -50%; other kinds of silk, without stretching the boiling water shrinkage rate of 40% -70%. Two hours after the fiber network by the nozzle, opening disorders uniform, full, baseball caps

    form a new composite structure relatively stable fiber. The former is lower by the stretched contraction, fiber bundles wrapped in the surface epithelia of the formation of low shrinkage; the latter without the high tensile shrinkage, are wrapped in tow SMIC, the formation of shrinkage core wire. This tow by a specific weaving dyeing and finishing, the fabric without Aurora, feel, excellent drape, flexibility and good gloss natural surface like a layer of thin white frost, handsome style. However, if the generation of the fiber or in the dyeing process deviation occurs, it will in the two-component polyester filament fabric dyeing defects occur, fitted hats

    Tuesday, May 14th, 2013
    9:41 am
    modified copolyester and not because of the symmetry
    indicating that the performance of polyester films were in favor of molecular chain along the direction parallel to the direction and arrangement of tension. The mechanical properties of polyester films were directly related to the film quality of the excellent Bad, It depends on the manufacture of polymer films the intrinsic chemical factors (composition, structure, etc.), but also with forming and post-film deal. the same draw ratio of PET / PEN than PET breaking strength increased slightly, straw hat

    but elongation was significantly smaller. This is due to the introduction of greater naphthalene conjugate structure, the molecular chain rigidity is high, so the modified copolyester and not because of the symmetry and regularity of molecular chain is destroyed leaving intensity decreased. the same composition of PET / PEN copolyester with the draw ratio is increased, the strength increases and elongation decreases. This is because the strength of the anisotropy of the polymer with the higher degree of orientation increases results. newsboy cap

    3. production of PET / PEN copolyester fiber with high strength industrial PET / PEN copolyester fiber production, making full use of excellent physical and chemical properties of PEN and PET combined with low prices, and can be used in the production of industrial yarn, high temperature use carpet, rubber reinforced materials, including tire cord, hose and strip, hot gas filters, paper, fiber blanket and a single filament, screen printing, and electrical insulation materials, industrial fabrics, ropes, cables and filters, etc.

    This resin shows a more excellent resistance to hydrolysis, etc., can be used for textile fibers and
    fedora hats

    9:40 am
    significantly increased the speed of sound module
    First plastic extrusion plant in LSJ20 275 swarmed in thick slices, then in the biaxial machine at 130 in multiples of the same two-way stretch to 3-4 times. PET / PEN polyester films were drying shrinkage reflects the film an important indicator of dimensional stability, drying shrinkage of the smaller films that better dimensional stability after heating, the more easily deformed. With the copolyesters of 2,6 - naphthalene ring unit content of the introduction and increase in dry heat contraction was significantly reduced, embroidery digitizing

    because the 2,6 - naphthalimide carbonyl unit into an increase of the rigidity of the macromolecular chains of copolyesters, so PET / PEN copolyester PET showed a more than excellent thermal stability, and 2,6 - naphthalene ring unit content is, the better thermal stability. copolyester films by measuring the speed of sound can be determined orientation of the mechanical properties of polymer units in the same draw ratio, with the 2,6 copolyesters - the introduction of naphthalene ring unit, chalk boards

    significantly increased the speed of sound module, which is due to 2,6 - naphthalimide carbonyl structural unit of the introduction of increased rigidity of the macromolecular chains of copolyesters. With copolyesters of 2,6 - naphthalene ring The introduction of unit, sonic orientation factor increased significantly. This is because the film manufacturing process, the naphthalene ring greater than the conjugated benzene ring structure, high rigidity of molecular chain, tend to produce straight chain structure, while PET has occurred despite molecular orientation, baseball caps

    but was folded chain structure, so the sound waves in the PEN / PET copolyester film stretching direction when the direction of propagation, the propagation direction and common molecular chain of polyester and PET molecular chains more than the parallel, the speed of sound greater. With the tension extension times increase the speed of sound module and sonic orientation factor increases, fitted hats

    Saturday, May 11th, 2013
    8:57 am
    Act proposal would involve
    Act proposal would involve a lot of chemical raw materials and the use of chemical products downstream products industry, "foreign producers of legal accountability bill" In addition to outside chemical products, pharmaceuticals, medical equipment and cosmetics, biological products, consumer goods, chemicals, automobiles or automobile equipment are clearly listed in the list of products subject to the jurisdiction, and children's products include the basic necessities to children of all items related to. The impact of the bill by the United States, domestic manufacturing companies will usher in even more severe in the trade environment, Bufenqiye Zaochengjiaoda burden and Ya Li, You Qi registered agent Zheyi steps will greatly increase the access to the U.S. market costs, Xing Cheng Maoyitiaojian of additional restrictions, reduced export advantage. straw hat

    The United States has historically been a traditional exporter in Ningbo China, Ningbo Inspection and Quarantine Bureau, according to statistics, from January to July, exports of U.S. goods in Ningbo approved a total of more than 50,000, the value of 14.6 billion U.S. dollars, up 36% from a year earlier and 43 %, an increase of large shows that the financial crisis, and weak market, the products exported to the U.S. is entering the accelerated phase. Under the influence of the above Act, the city textile, paint, rubber, chemical fiber, household appliances, children's goods exports over ten different categories of advantages will be subject to varying degrees. To this end, inspection and quarantine departments of emergency as early as possible to remind the relevant export enterprises to actively respond to, strengthen the collection and understand the relevant situation. One is to speed up the adjustment of product structure, improve environmental protection requirements,newsboy cap

    development of rigorous product review process and the mandatory testing procedures, improve product quality and safety and competitiveness. The second is to use high technology and clean technology, promotion of green chemical production, manufacturing in the search for safer chemical alternative substances, enhance product update capability. The third is to intensify contacts with U.S. importers to understand the latest developments of the Bill, as soon as possible in accordance with regulations related to audit, registration and other formalities. Finally, if the event of a quality event, should strengthen the accountability of Yingdui products processing capacity, timely reporting and to avoid negative Ying Xiang, and increase ability to resist risks Fangzhi products being Falv accountability O'clock in the unresolved Er laissez-faire situation from getting worse. Lee Sung-new character cards, 52-year-old in 1984 into three Xiaoshan dyeing factory, served as deputy finance director and director, ternary Holdings Group chairman. Li Cheng a new love for sports,

    running daily, weekly golf, liked reading the newspaper, the dynamic between the pursuit of life and health business. Three Holding Group, just three years old this year. Company to a beautiful brochure production, low-key, celebrated her birthday. Brochure outlining the group on the fabric, clothing, new materials, real estate, four industrial Forum of the Imagination, leaving everything between the lines Li Cheng, chairman of the new thoughts on the future. "10 years with the hope that clothing will become the company's main business." Cheng Li new told reporters, "This is my dream for years, but also the requirements of the law industry." "Three" is located in Xiaoshan, is the largest chemical fiber textile base one. In China, "Xiaoshan made" PTA 22%, 15% fiber. Here, an extension to the garment industry chain has just begun. Li Cheng made a special trip to Italy last year, the new investigation, some of the world-renowned companies from the local business fabric and then started the development of the world industry experience first-line clothing brand he was impressed.
    fedora hats

    8:56 am
    However, the Government did not respond
    However, the Government did not respond. If the Government talks with worker representatives, to avoid the strike. All Pakistan Textile Mills Association (APTMA) Punjab governor Ejaz (Gohar Ejaz) asked the Government to take measures, according to recent United Nations report that the severity of floods, for access to direct U.S. and EU markets access rights. This year's floods exceeded the severity of the tsunami in Sri Lanka, but also over Haiti and the earthquake in Pakistan, Azad Kashmir. Report on the United Nations, he added, because the flood, estimated to be about 1400 million people were affected. The impact of these disasters may be worse in the future, flooded cotton field will lose millions of bales of cotton, therefore, he was worried that the textile industry will be seriously affected. In addition, the industry is also expected that a large number of industry will collapse, leading to massive unemployment. Ejaz urged the Government to take an active trade diplomacy measures, embroidery digitizing

    such as the practice of Sri Lanka after the tsunami, the United States and European markets for direct access to the right. In addition, he also called for negotiations between the Government and the United States, to fight through the Trading Corporation of Pakistan (TCP) deferred payment loan of cotton imports, this was to save the textile industry, to avoid business failure. According to "China Daily" (ChinaDaily) Monday citing the National Development and Reform Commission (referred to as: Development and Reform Commission) Wang Yiming, vice president of Macroeconomic Research, then reported that China's trade surplus in July record high of just one and a half since the accident that Western countries should not be reason to put pressure on China to urge China to speed up pace of yuan appreciation. Wang Yiming, said the remaining months of this year, the export rate may slow down, so the trade surplus will narrow, he said, the RMB exchange rate is not the decisive factor leading to trade imbalances. chalk boards

    As China's import growth has slowed in July by the Chinese trade surplus of 20.02 billion U.S. dollars in June to expand to 28.7 billion U.S. dollars, the highest since January 2009 a new high. January 2009 surplus amounted to 39.11 billion U.S. dollars. Recently, Ningbo Entry-Exit Inspection and Quarantine Bureau WTO's Office received information, the U.S. House of Representatives two bills being considered would cause domestic exporters a considerable impact. The first bill to reform the "Toxic Substances Control Act," all kinds of chemical substances and chemical compounds and other potentially harmful substances to make limited, including safety audits to ensure that chemical substances, chemicals, EPA required to submit data, submit the non-confidential information is available for public inspection, control of dangerous chemicals. The second bill, "the legal accountability of foreign producers Bill" was on July 21 Energy and Commerce Committee in the next vote by. Act provides for consumer goods exported to the United States, baseball caps

    the United States must appoint a Registered Agent, Registered Agent shall be U.S. permanent residents or local businesses, and authorized the agent in the state and federal civil court on behalf of the manufacturer of Process, or product no entry the United States. Registration, means that overseas manufacturers of products into the United States jurisdiction, once the product has quality problems, will assume the legal responsibility of accountability. At the same time, the recent U.S. House of Representatives House of Representatives has proposed toxic metals Protection Act, as children's products under a restriction of toxic heavy metals initiatives. Toxic metals to protect the newly proposed law provides for four types of products intended for use by children limits the surface of toxic heavy metals: antimony to 60ppm, barium 1000ppm, cadmium is 75ppm, Chromium as 60ppm. Inspection and quarantine experts pointed out that the two bills and children's products toxic metals Protection.fitted hats

    Friday, May 10th, 2013
    10:27 am
    polyurethane crystallinity, so that the spandex fibers have
    First, organic nano-materials surface treatment to prevent the agglomeration of nano materials, untreated montmorillonite interlayer spacing of about 1nm, sheet folding stacking area to the number of microns. After treatment by the organic layer between the short-to 1.9nm, the lamellar area of 200-300nm. The processing of organic nano-MMT is introduced into the manufacture of polyurethane chain extender component, the chain extender and prepolymer reaction layers will be softened a lot of heat,straw hat

    the introduction of chain extender monomers clay surface after layer spacing expanded to 2.7nm, while the role of the lamellar area of the crack, and further reduced to tens of nanometers. MMT Layered thus achieved in the polymer matrix and nano-dispersion. Hydrotalcite has the same history and effect, but the water was greater than the montmorillonite interlayer spacing. PU spandex fibers such by the nano-layered composite materials and nano into spandex fibers, nano-materials can give full play to the small size effect and surface effect; exhibit superior surface properties and physical crosslinking effect; newsboy cap

    serve to increase polymer force chains to improve the PU soft segment polyurethane crystallinity, so that the spandex fibers have higher mechanical properties and good flame retardant, antibacterial, antifungal properties and excellent resistance to chlorine performance. Nano technology is the intercalation compound to improve and enhance the quality of an effective technology spandex way. 2 of melting spandex production fused several important factors 2.1 Manufacturing technology of spandex fiber grade polyurethane sections (with one-step synthetic fiber grade thermoplastic polyurethane particles), after drying, melting,

    metering, spinning, winding, oil, balance of processes that are melt-spinning spandex products. The initial products in the melt spinning spandex elastic recovery, heat resistance and so not even worth the Spandex, but with the technology to produce fiber grade polyurethane chips become more sophisticated and technology have improved melt spinning, melt spinning spandex and dry products can be Spandex comparable products. First, the performance of TPU (heat resistance, hydrolysis resistance) improved,
    fedora hats

    10:26 am
    polyester polyol. Polyester polyol with this nano-materials
    tensile strength and heat resistance, the actual detection of the fracture strength of melt-spun spandex fibers can reach 1.5 ~ 1.8CN/dtex, elastic recovery rate : 94 ~ 300% 96% rebound, rebound 98% to 100%, can increase the heat resistance generally 10 ~ 15 , the maximum can reach 140 , and the spinning stability is excellent. Donghua University, the invention is a melt-spinning spandex polyurethane additives used in the manufacture of sub-method [8], is about to poly (butanediol tetramethylene) ether glycol, or poly (butylene adipate) diol ester and the reaction of diisocyanate prepolymer with active hydrogen with phenols, embroidery digitizing

    alcohols, esters, amines and other compounds react with the prepolymer, the prepolymer of NCO groups at both ends of the protection to be temporary, the formation of a stable at room temperature method of manufacturing sub-urethane. Nanotechnology has been applied in the melt-spinning spandex, a method is called in situ polymerization, the surface treatment of nanoparticles added to the monomer, and then lead to monomer polymerization, so as to achieve the purpose of nano-modified polymers. chalk boards

    Mediated by the silica gel and then divided into nano-SiO2, this process and synthesis of polyester polyols combined together, can be obtained nano polyester polyol. Polyester polyol with this nano-materials can be obtained by high-performance nano-modified polyurethane (including dry). Another method of intercalation composite nano-technology [9], that is, the monomer or polymer layer inserted between the inorganic layers, and then thickness of 1nm, 100nm wide sheet structure around the matrix element strip, making it even dispersed in the polymer. baseball caps

    To layered materials of polymer and inorganic compound on a nanometer scale. Such nano-technology researcher from Institute of Chemistry of the Sun Xianyu, Kong Kejian researchers and College of Chemistry and Molecular Engineering Professor Wu Jinguang and other technical personnel in the application of dry spandex successful, and has obtained patents, the technology also intercalated nanocomposite also suitable for melt-spinning spandex. The invention use of inorganic nano-layered clay materials such as aluminum salt (MMT), Mg-Al hydrotalcite salt (LDHS). fitted hats

    Thursday, May 9th, 2013
    9:45 am
    different diameters (40 mm, 60 mm) and different thickness
    Sewing material feed device driver will be placed in a feeding tray and can be rotated to another level of rotation between the driven disc, the level of feeding from left to right. Disk is driven through a flexible lever device to provide pressure. To ensure that the edge of the clamped material does not occur when the slip, the two outer edge of the feed plate are grinding out of the tooth profile. This feeding dish has the same functionality as the presser foot. Drive plate and driven disc can have different tooth profile (pitch 0.6 mm to 1.0 from a 1.5 mm), straw hat

    different diameters (40 mm, 60 mm) and different thickness (until 7.0 mm from 0.8,1.5,3.0 mm). The choice of feeding tray is not based on fur hair length, diameter and shape, but according to the thickness of the lower classes to carry out the leather. Thick, coarse teeth should be selected feed tray to send thick leather (eg: kid); and use a fine-tooth thin plate to send the feed fine leather (for example: mink and muskrat skins.) Material seam or seam width, that is, to the material under the needle at the edge of the distance is done by hand or some additional devices to be constant. newsboy cap

    Fur sewing machine sewing speed of the speed of the old 1500 and 1800 generally needle / min, The modern sewing machine can reach the maximum sewing speed 4200 stitches / minute. And this is only a long line of stitches in the sewing and sewing machine to add a cooling device can be achieved by an inflatable tube to make the process of sewing machine needle was not subject to high temperature and interrupted by the question.PET bottle PET protection is strong,

    can fully guarantee the health and safety and consumer health and safety. PET PET bottles outstanding performance, very flexible and transparent, can make any shape you need, to highlight the effect of the product packaging bottle. PET PET bottles easy to use, light weight, unbreakable, re-closed after opening the cover, polyester PET beverage bottles easier to carry, transport and storage. PET can be recycled PET bottles, PET is 100% recyclable,
    fedora hats

    9:44 am
    For fine leather, pin density can be adjusted to up to 10-12 stitches
    the quality of materials and sewing thread were Bodhisattva will decide the final seam quality. Fur in the sewing process, the general use of 100% polyester multi-Chief silk, polished cotton and cored wire. Than sewing thread polyester cotton line showed higher tensile strength (about 50% higher), five times higher and significant extension of the aging resistance. Stitch Type 501 single packet seam stitching constituted by the single line and has good ductility, sewing thread wrapped around the edge of the material so that they are - flat. embroidery digitizing

    This type is mainly used to trace the edges of leather to put together another way not visible, the small piece of leather to fight side by side in one, which produced a fine touch of the seam effect. Pin density is always the economy (sewing thread consumption) and the seam strength of the compromise choice. Higher density pin seam strength will increase, but also will increase the consumption of sewing thread. In addition, it also helps to reduce the load on the edge of material to avoid cracking. chalk boards

    For fine leather, pin density can be adjusted to up to 10-12 stitches / cm. Fur for crude fiber, pin density should be reduced accordingly, or sewing materials will result in over-perforation. Sewing thread tension. Sewing thread used to stitch tension is the tension force. Higher during the leather sewing thread tension will help put together and leather coat assembled side there will be tightly put together to form an invisible seam. Sewing thread tension will lead to lower sutural line between the edge of leather slip by with the seam in parallel or oblique pull, the sewing thread and leather will be friction, baseball caps

    causing the leather is torn or broken . Therefore, for a variety of materials, the tension is necessary to find the best size and durability to produce the best side in the formation of a fur the best results. Speed efficiency challenge both in the garment factory machinery or hand-made fur workshop in the widespread use of disc feeding device with a special leather sewing machine (single sewing machine.) One needle is movement in the horizontal direction. fitted hats

    Wednesday, May 8th, 2013
    11:00 am
    is mainly responsible for the establishment
    is mainly responsible for the establishment of a sound system of corporate group organization and conduct of the members of the ideological guidance of youth, skills training, leisure and cultural life of youth organizations, members complete assigned by corporate management other tasks. Come forward by the Communist Youth League, the national focus for the hundreds of private enterprises in the selected strokes Communist Youth League secretary, the first time across the country. Zhejiang Party Secretary Zhou Liujun group that is the private economy of Zhejiang province, the 100 strong enterprises a high salary bills for nationwide elections Communist Youth League secretary, is the way business group of cadre selection and innovation, is also a non-public business model innovation League Building is conducive to leading examples of the Non-public enterprises League building. At the same time, public action is also described selected group of non-public business development organizations in Zhejiang active role in reflecting the social responsibility of private entrepreneurs in Zhejiang Province and the Communist Youth League, youth attention. straw hat

    Zhou Liujun that the whole selection will move according to the law in accordance with regulations, according to "Mission Cap" to adhere to the Communist Youth League-led combine with the business subjects, open, fair, just, and will fully respect and reflect the business people in the recruit selection process in the main role . Recruitment, the League Committee will be unified on the recruiting front office staff focus on business training to upgrade their skills and overall quality of service groups. Recruitment company, said The selection of recruits will be an important reserve cadres enterprise culture. It is reported that Zhejiang Provincial Group will be September 7 at the registration website to get an interview published on the list of qualified personnel, the Mission City phone call to confirm applicants to participate in the scene and interview. According to the interview results from the high score to low score for each position to determine three finalists personnel. Interview process will accept the supervision of a notary public. By two-way choice, newsboy cap

    determined by the employing company, a Communist Youth League secretary candidate, signed a letter of intent employment. Through investigation, the official Communist Youth League head for business recruitment. Six months at work, in accordance with the "Mission Cap" provisions of the democratic electoral process, by holding a general membership meeting or on behalf of the General Assembly formally elected posts, as a corporate secretary of Communist Youth League. I am afraid there will be no brand can easily come up with advanced customization of accounts publicity in the world, is well aware of all things early. Advanced Customization biannual fashion week in Paris is far greater than the purchase of sexual ornamental, most cases have been widely regarded as smashing a lot of money, make great efforts to maintain the brand image of an activity. The first two years of financial crisis there has been much advanced custom query, when people decide that it is precarious,

    it was tough to walk over. Now the clouds dispersed, as "New York Times," Cathy Horyn said, in fact, when all of the luxury goods company to recover, they will focus aimed at Chinese customers in China and hunger. Nobles in developing countries, including China, have also added to the customer base of high-level customization. Advanced Custom luxury, utility line between the high custom existed nearly a century they have value is creative, fabric, craft a variety of unique is not found in other parts of the garment can not see way. This year in particular, can be said about the creative fabric. John Galliano said: "If a series does not use on fabric, like a painter to paint that does not paint so ridiculous. In France, a kind of wonderful to say, the fabric so noble. I like to find the perfect texture, perfect for printing and dyeing, perfect printing to enrich my creative ideas. "had half of the products available to customize the Swiss brand famous cloth brand Jakob Schlaepfer recent quarter for 250-300 new research and development production designer fabrics,
    fedora hats

    10:59 am
    Work one month on the amount
    Work one month on the amount of textile machinery company delivered a breakthrough 50 million yuan. Second, Eagle Group, a subsidiary of complex equipment, carbon fiber and key R & D projects have successfully passed the national identification, indicates that China has successfully achieved carbon fiber production and industrialization made, completely broke the carbon fiber market, developed countries on the long-term domestic monopoly, to reverse the of our complete dependence on imported carbon fiber situation. embroidery digitizing

    This allows us to realize one fact: the traditional manufacturing and high-tech industries to prosper both in the Eagle Travel Group has become a reality, while the carbon fiber of this "king of new material" is just made eagle swim the pace of transformation and upgrading of substantive opportunity. Resolutely traditional manufacturing enterprises select a new target group, formerly known as Eagle Tour Lianyungang Textile Factory, 20 years ago, the production of iron and iron-ray machine started cutting machine, through product innovation and reform, from the insolvent state-owned textile machinery plant development net assets of one billion yuan of private joint-stock enterprises, now the nation's leading textile finishing industry, business, product coverage of the domestic market more than 80%, and enjoy the "global textile finishing experts" in the world. But in any case it still is a typical traditional textile machinery manufacturers. Zhang Guoliang, chairman of the board until 2005, began looking for new product development objectives, chalk boards

    and "carbon fiber" in the name firmly written into the heart of the moment, a profound transformation of the revolutionary in-house quietly. The tour group for the eagle, in order to overcome difficulties carbon fiber industrialization easy: hi-tech like an insurmountable threshold, a huge investment, something like a bottomless black hole, and there is no ready-made production equipment can refer to, no readily available technology can reference. But in the end, Zhang Guoliang determined despite the difficulties, integrating all aspects of the country's technological advantage, taking an integrated innovation, the completion of the carbon fiber industry in the larger cause. September 2005, from Lianyungang, Jiangsu Ying Yu Textile Machinery Group Holdings, Jiangsu Olympians Group Co., Ltd. Jiangsu Lianyungang Eagle shares new material limited liability company established and began building an annual output of 220 tons of carbon fiber production line. baseball caps

    October 2007, China Building Materials Group, a subsidiary company in China to increase their investment composite form of participation in the development of the project, and Jiangsu Lianyungang Eagle Tour Textile, Jiangsu Olympians in the complex formation of Eagle Group Co., Ltd. carbon fiber. Ying Yu Textile Machinery in the original 500 tons of PAN based carbon fiber precursor and carbon fiber production capacity of 220 tons, based on the complex and Donghua University to undertake Eagle State Development and Reform Commission, "an annual output of 2,500 tons of precursor PAN 1,000 tons of carbon fiber project. " After two years of technical research, the complex system to solve the Eagle localization of key equipment problems, and built the present China's first (set) of the largest and most technologically sophisticated production line of the national production, the overall technology reached the international advanced level. By the end of 2008, 1000 tons of carbon fiber production line as the Eagle tons of carbon fiber in complex industrial projects in a smooth production. fitted hats

[ << Previous 20 ]
About Blurty.com